- Upgrade HAL to transmit the bit-slide to HA
- Upgrade wr_mon tool to displat HA servo data
- Upgrade wrs_dump_shmem to display the right data
Conflicts:
	userspace/tools/wr_mon.c
	userspace/tools/wrs_dump_shmem.c

extensions

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Take the HA first

This reverts commit 74e16153.

since v5.0.x the WRS needs more time. We prefer to increase the reboot
time in order to properly refresh the web page after a reboot.

Remove the stderr in the shell_execution to improve parsing without the
state of the ports properly.

According to php manual (http://php.net/manual/en/function.strpos.php)
strpos must be used the indentical comperator because strpos can return
0 if string found at position 0.

Now we use ajax+js to constantly refresh value of WR into the web
interface without needing to manually refresh the webpage by the user.
However this refresh flood the accesslog and this is a problem with the
small RAM available

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Dump temperature, voltage, bias, TX and RX power from the SFP's DOM area
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

when query OID wrsBootConfigStatus
from:
SNMP: Error wrsBootSuccessful: Unable to read status file for wrsBootConfigStatus
to:
SNMP: Config file is not valid or too short (less than 200 characters)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This fixes builds e.g. on ubuntu 18.04
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

DONE: Kconfig, assembly_ppsi_conf.sh
TODO: SNMP, DOCs, HAL?

Redefine options CONFIG_PORTXX_PARAMS in dot-config
--role={master,slave,auto,none}, keep non-wr for compatibility
--ext={WR}:{HR}, HR for future, if no ext defined use WR as default
--add extra option to disable/enable triggering errors in SNMP
--add option for delay mechanism (dm)
  p2p or e2e
  e2e default
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For rnabling 50ohm termination for 1-PPS input
It is set from HAL.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Requires gateware synthesized with wr-switch-hdl commit:
b1b621b add bit to control WRS 1-PPS in termination

Also increase all *_SHMEM_VERSION
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

uplift contains fixes for veryx tests
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

    The bitslide module won't be reset when replugging the SFP and fiber, which may lead to
the wrong bitslide.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

As now the compilation is done only in wr-switch-sw repo.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add MIB to /wr/lib/
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

+fix typo
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There is no support of STP yet.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

If CPU is included or not in the mask with all ports the rtu_stat shall display
"ALL CPU"

rtu_stat add mask 01:80:c2:00:00:53 0x3ffff 0
rtu_stat add mask 01:80:c2:00:00:57 0x7ffff 0

rtu_stat displayed:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL           0          STATIC  (hash 090:0)   -
[...]

now:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL CPU       0          STATIC  (hash 090:0)   -
[...]
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Comments are simply ignored. There are not written back to the dot-config.
This solution does not support "#" signs in the parameters' values.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Remove leading spaces (but not following)
--Ignore value if not starting with ",[digit],y,n,m
--ignore comments after value
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Merge BMCA

returns 0 on success, -1 if leap61 test failed, -2 if leap59 test failed and -3 if no-leap test failed.