Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update wrsSlaveLinksStatus to use switch mode configured in dot-config not read
from SPLL.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

hal_mode can be:
--TIME_GM (Grand-Master)
--TIME_FM (Free-Running Master)
--TIME_BC (Boundary Clock)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Until now when SFP was removed its info stayed in HAL's shmem
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Pid was written to late and monit thinks wrs_watchdog is not running.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve LED signaling

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

HAL on exit changes status LED color, to disable status LED we have to stop
HAL before turning off status LED.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Execute wrs_status_led when system is going down
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

From now, turn left LED on when link is up. Depending on the configured
function LED will have the following color:
--orange for port configured as non-wr
--green for slave
--yellow for master and other cases (like wrong configuration)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When hal's init script is called with restart option then script complain
that hal is already running. Probalby it takes some short time to kill hal's child.
Add sleep 1 second to solve this problem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add wrs_watchdog.

However, still is possible to run it with -d, it daemonizes itself but without
going to backgroud. We send it to background in init script.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add Number of times the watchdog has restarted the HDL module responsible
for the Ethernet switching process.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add restart counter of wrs_watchdog to wrsStartCntGroup
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

And from SIGUSR1/SIGUSR2.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Print version at startup when daemon and together with help.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Use CONFIG_WRS_LOG_WRSWATCHDOG as logging destination
--Add restart counter for wrs_watchdog
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Add destiantion to watchdog log to Kconfig
--update documentation
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add watchdog to FPGA and include bugfixes
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Check whether deltas (delta_tx_m, delta_rx_m, delta_tx_s, delta_rx_s) are
not zero in SNMP, not in PPSI

Remove object wrsPtpRTTErrCnt from MIB, not compatible change, but we're before
release...

Update PPSI
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move creating rule for PTP over UDP from rtud init script to wrsw_rtud.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Removed code used to be to add rtu entries for local ports. Such setup suppouse
to allow access to ARM CPU from switch's ports. However, hw_addr in hal_shmem
was not filled and it end up that address 00:00:00:00:00:00 was added.

Removed solution didn't work neither we wanted it to be there.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Hope this time it works. Problem was when dot-config set IP via dhcp then
static.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix problem when IP address was set via dhcp then as static.
Second problem was that udhcpc wasn't able to get IP when interface was put down just
before its start.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

set temperature thresholds
disable logic in object wrsSwcoreStatus
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Return always OK for wrsSwcoreStatus (except for first read).
Logic for this object needs more investigation.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix specifying verbosity level by setting WRS_MSG_LEVEL env variable
and fix changing verbosity with -v/-q
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>