Please not that some commits had non backward compatible changes in MIB.
However, end result of MIB is backward compatible.

Please not that within this git branch there we non backward compatible changes
in MIB.

Move branch wrsPtpGlobals, wrsPortsTable and wrsTemperature to previously
removed wrsPpsi. Moved branches and objects contain "X" at the end.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add Not Availavle (NA) value for objects:
-ptpPhaseTracking
-portLink
-portLocked
-portSfpError

SNMP's recommendation is that valid values should be greater than 0.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Functions wrs_fpopen and wrs_fpclose are not needed anymore.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Read temperatures and threshold levels of temperatures:
-fpga
-pll
-psl
-psr
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

-rename since read_hal will read also temperatures
-add static to global variables
-no need to read_servo before show_unadorned_ports
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

In PPSI remove structure ptpdexp_sync_state_t, which was used by removed call.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Get info about ppsi only from ppsi's shmem. Don't display duplicated data.

Remove SHOW_SNMP_GLOBALS, since SNMP doesn't use wr_mon for servo stats
anymore. It uses ppsi shmem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Added menu "Management configuration" to Kconfig with:
-moved options from "Local Network Configuration":
 --SNMP_TRAPSINK_ADDRESS
 --SNMP_TRAP2SINK_ADDRESS
 --SNMP_RO_COMMUNITY
 --SNMP_RW_COMMUNITY
-added threshold levels:
 --SNMP_TEMP_THOLD_FPGA
 --SNMP_TEMP_THOLD_PLL
 --SNMP_TEMP_THOLD_PSL
 --SNMP_TEMP_THOLD_PSR

Update user manual.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Note threshold level is not implemented in .config.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Create new branch for temperature sensors wrsTemperature (1.3.6.1.4.1.96.100.8)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

HAL at update of fan speed reads Switch's temperature sensors.
Sensors read:
-FPGA
-PLL (was read before to drive PWM for fan)
-Power supply left
-Power supply right

Additionally:
-add hal_temp_sensors structure to hal shmem, add current temperature and
 threshold values (to be implemented in later commits)
-increment HAL_SHMEM_VERSION
-update hal_shmem.h in ppsi
-update dump_shmem with new structure, add specific type for temperature
 sensors
-in hal_ports.c
 --rename struct wrs_shm_head *head to struct wrs_shm_head *hal_shmem_hdr
 --remove void *hal_port_shmem as not needed,
 --make struct hal_shmem_header *hal_shmem extern, defined in hal_main.c
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Replace define I2C_SFP_H with I2C_IO_H
It was not possible to include i2c_io.h and i2c_sfp.h at the same time
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

split wrsPtp from wrSwitchMIB 3 (1.3.6.1.4.1.96.100.3) into:
--wrsPtpGlobals (wrSwitchMIB 6 (1.3.6.1.4.1.96.100.6)), old wrsPtpGlobals
--wrsPortsTable (wrSwitchMIB 7 (1.3.6.1.4.1.96.100.7)), old wrsPtp.ptpPort

rename wrsPstats into wrsPstatsTable
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

PTP related objects should be called WR-SWITCH-MIB::ptp* instead of
WR-SWITCH-MIB::ppsi*. People need to know it's PTP related, not necessary that
the running PTP engine is PPSi.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To report when invalid SFP configuration is detected and actions has to be taken.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Until now snmpd and wr_mon reported mode only as master or slave. However,
mode can be also non-wr or auto.

changed:
-wr_mon
-snmp
-MIB
-dump_shmem
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove note about extra item after wrs tables (bug fixed already)
Add example how to print all objects exported by wrs
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Rename portSfpID into portSfpPN, which keeps part number (like AXGE-3454-0531).
Add portSfpVN to keep Vendor name (like Axcen).
Add portSfpVS to keep Vendor serial number (like AX12030003038).
Update MIB.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add to snmp:
-portSfpID - PN of SFP inserted into switch port
-portSfpInDB - report if inserted SFP is in data base
-portSfpGbE - report if inserted SFP is 1GbE, note only 1GbE are supported by
              FPGA

update wrs_dump_shmem to display portSfpInDB and portSfpGbE flags.
Update MIB.
Fix typo in MIB file (ppsiGrandmaterID -> ppsiGrandmasterID)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There is no need to report port_locked, peer_id (and later sfp info, etc.)
for disabled ports.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

SFP matching is done by in order:
-vendor name, part number, serial
-vendor name, part number
-part number

If .config's entry (i.e. serial) is not empty match will happen only with
specific serial.

Additionally:
-Change default defines in Kconfig
-Update user manual with matching info
-Remove entry from wrs-todo about matching SFP vendor
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update dump_shmem accordingly.
Increment HAL_SHMEM_VERSION due to changes in shw_sfp_caldata structure.
Still missing matching based on vendor name and part number.
Update hal_shmem.h in ppsi
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove spaces from read SFP header
-vendor_name
-vendor_pn
-vendor_serial

Don't read SFP header twice at hal_port_insert_sfp in hal_port. Before header
was read first in function shw_sfp_read_verify_header, then indirectly by
shw_sfp_get_cal_data
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

add to snmpd and MIB:
-WR-SWITCH-MIB::ppsiDeltaTxM
-WR-SWITCH-MIB::ppsiDeltaRxM
-WR-SWITCH-MIB::ppsiDeltaTxS
-WR-SWITCH-MIB::ppsiDeltaRxS
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update needed because wr_mon uses now shmem to get ppsi status.
Note that is still uses ipc for enable/disable tracking.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Since there is no more parsing of wr_mon name field is not needed.
All data are read from shmem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

-update snmp do use ppsi's shmem
-update WR-SWITCH-MIB.txt
-update makefile
-removed wr_mon parsing

It looks like ppsi's servo state provided in servo_state_name is not current
state but previous
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Double values printed by ipc with shmem to verify readings. IPC to be removed
soon.
No need do update snmp's part of wr_mon since it will be removed (snmp will
use shmem directly).
Include implementation of shmem locks for read.

It was seen that phase setpoint read via shmem sometimes differs from value
read via ipc. However it shmem's value is more recent. Assignment of ipc's
cur_setpoint in ppsi's servo is done before setting to new value.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

dump_many_fields shall check if pointer to dump is valid. It is simpler than
checking if all wrs_shm_follow were successful.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Dump entire struct wr_servo_state_t
Add global_ext_data to pp_globals
Remove temporary WRS_PPSI_SHMEM_VERSION
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

since this structure is included in ppsi.h
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Changes include:
- lift of ppsi commit
- temporarly define WRS_PPSI_SHMEM_VERSION in wrs_dump_shmem.c since dumper
  requires structure updates
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Now by default wrs_dump_shmem prints only valid rtu entries. To dump all use
"-a" parameter. Note that rtu has 2048 htab and 4096 vlan entries.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>