- 15 Mar, 2019 4 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 08 Mar, 2019 10 commits
-
-
Tomasz Wlostowski authored
-
Adam Wujek authored
If the new firmware uses different bitstream, the calibration values has to be changed. However, if the new firmware touches just software it is worth to keep the old values. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Tomasz Wlostowski authored
wrsw_hal: store initial TX calibration results in a persistent file and use the stored phases as target points for TX phase calibration
-
Tomasz Wlostowski authored
-
Tomasz Wlostowski authored
rt_ipc: revert fast phase tracker option, mini-ipc performance is so mediocre it doesn't make sense to do faster phase measurements...
-
Tomasz Wlostowski authored
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Tomasz Wlostowski authored
userspace: wrsw_hal take initial TX phase measurement (modulo 800ps) as the target point, improve led handling
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Tomasz Wlostowski authored
-
- 07 Mar, 2019 4 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 28 Feb, 2019 5 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Benoit Rat authored
since v5.0.x the WRS needs more time. We prefer to increase the reboot time in order to properly refresh the web page after a reboot.
-
Benoit Rat authored
-
Benoit Rat authored
Remove the stderr in the shell_execution to improve parsing without the state of the ports properly. According to php manual (http://php.net/manual/en/function.strpos.php) strpos must be used the indentical comperator because strpos can return 0 if string found at position 0.
-
Benoit Rat authored
Now we use ajax+js to constantly refresh value of WR into the web interface without needing to manually refresh the webpage by the user. However this refresh flood the accesslog and this is a problem with the small RAM available
-
- 19 Feb, 2019 14 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Dump temperature, voltage, bias, TX and RX power from the SFP's DOM area Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Move wrsPtpInstanceName to be the first (after indexes) OID. Thanks to this, by doing snmpwalk/snmpgetnext of OID wrsPtpInstanceName(.<n>.<m>), the user gets in a single responce: --n - a port number --m - an instance nubmer --value which is an instance name Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
The list of VLANs is implemented as a string, becasue SNMP does not allow tables within tables. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
when query OID wrsBootConfigStatus from: SNMP: Error wrsBootSuccessful: Unable to read status file for wrsBootConfigStatus to: SNMP: Config file is not valid or too short (less than 200 characters) Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 29 Jan, 2019 1 commit
-
-
Adam Wujek authored
This fixes builds e.g. on ubuntu 18.04 Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
- 20 Nov, 2018 2 commits
-
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
DONE: Kconfig, assembly_ppsi_conf.sh TODO: SNMP, DOCs, HAL? Redefine options CONFIG_PORTXX_PARAMS in dot-config --role={master,slave,auto,none}, keep non-wr for compatibility --ext={WR}:{HR}, HR for future, if no ext defined use WR as default --add extra option to disable/enable triggering errors in SNMP --add option for delay mechanism (dm) p2p or e2e e2e default Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-