- 07 Sep, 2019 1 commit
-
-
YimengYe in Tusstar authored
-
- 11 Jun, 2019 1 commit
-
-
li hongming authored
-
- 10 Dec, 2018 1 commit
-
-
li hongming authored
-
- 28 Nov, 2018 1 commit
-
-
li hongming authored
Support aligning the PPS out to PPS input when WRSFL works as GM.
-
- 19 Oct, 2018 1 commit
-
-
li hongming authored
1. Add new variable ext_pps_latency_ps in struct spll_stats, using it to get the ext_pps_latency parameter from ARM(linux). 2. Change SPLL_STATS_VER to 4, modify the related function. 3. Modify the Main PLL phase shift in GM mode according to ext_pps_lat- ency_ps. Calibration are needed if you want to align the PPS out to PPS in.
-
- 18 Oct, 2018 1 commit
-
-
li hongming authored
When WRSFL works as GM, the phase difference between pps_out and pps_in varies every time WRSFL reboots.
-
- 22 Sep, 2018 1 commit
-
-
li hongming authored
-
- 14 Sep, 2018 1 commit
-
-
li hongming authored
-
- 09 Sep, 2018 1 commit
-
-
li hongming authored
Add external AD9516 configuration. (VCXO is 25MHz) Modify softpll_ng according to the external AD9516. Bug: snmpd reports the wrong softPLL state.
-
- 11 Jun, 2018 1 commit
-
-
Grzegorz Daniluk authored
-
- 21 Dec, 2016 8 commits
-
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
- 03 Aug, 2016 8 commits
-
-
Dimitris Lampridis authored
It does not make sense when the init is stored in flash and the board has no EEPROM. Otherwise, storage_init() calls mi2c_devprobe() if needed.
-
Dimitris Lampridis authored
-
Grzegorz Daniluk authored
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
This function can be used to discard packets with the wrong destination IP. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Grzegorz Daniluk authored
-
Grzegorz Daniluk authored
-
Grzegorz Daniluk authored
-
- 29 Jul, 2016 14 commits
-
-
Cesar Prados authored
-
Adam Wujek authored
Add the mini SNMP SNMP responder to the WRPC. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Tread as error when 0 is returned from the set_value function. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Copy the pointer even it is not used now Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Move wrpcSfpEntry and wrpcTemperatureEntry to be a part of limb not a twig. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Add support for ASN_UNSIGNED to set_value and get_value. Also return 0 if ASN not supported. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Fix problems reported by smilint (smilint lib/WR-WRPC-MIB.txt) Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Add an object to restart PTP via SNMP (wrpcPtpConfigRestart). Also don't restart ppsi after SFP updates in the flash. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
When snmpset is performed on not existing or read only OID, then response packet does not contain to-be-set value. Due to that, returning packet is shorter. It is necessary to recalculate sizes of the fields inside the response packet. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Pass returned value from twig functions (group and table) in the response. Now setting read only values return proper error (SNMP_ERR_READONLY). Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
SNMPv1 does not support counter64. Add tests for that too. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
spec_snmp_defconfig -- config for spec with SNMP responder enabled spec_snmp_set_verbose_defconfig -- config for spec with enabled SNMP (SNMP responder, SETs, verbose), fake temperatures, SDB storage Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
"sfp detect" was incorporated into "sfp match". Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-