... | ... | @@ -70,15 +70,20 @@ The board could be plugged on a different carrier, but the supported gw/sw/lib a |
|
|
<strong>Aperiodic SMMPS variables</strong> production/consumption</td>
|
|
|
</tr>
|
|
|
<tr class="even">
|
|
|
<td>Supported WorldFIP bitrates</td>
|
|
|
<td>31.25Kbps, 1Mbps, 2.5Mbps<br />
|
|
|
The FMC supports 5Mbps, but it has not been tested</td>
|
|
|
</tr>
|
|
|
<tr class="odd">
|
|
|
<td>Front panel connectors</td>
|
|
|
<td><strong>Micro D-Sub 9</strong> for WorldFIP<br />
|
|
|
<strong>Lemo 00</strong> for input synchronization pulse; sw selectable 50 Ohm termination</td>
|
|
|
</tr>
|
|
|
<tr class="odd">
|
|
|
<tr class="even">
|
|
|
<td>Synchronization</td>
|
|
|
<td>Upon a sync pulse from the Lemo, a new macrocycle starts after few us</td>
|
|
|
</tr>
|
|
|
<tr class="even">
|
|
|
<tr class="odd">
|
|
|
<td>Front panel LEDs</td>
|
|
|
<td><strong>FMC TX ACT</strong> : at the end of a macrocycle there has been no transmission failure<br />
|
|
|
<strong>FMC TX ERR</strong>: at the end of a macrocycle transmission errors have been detected<br />
|
... | ... | @@ -89,7 +94,7 @@ The board could be plugged on a different carrier, but the supported gw/sw/lib a |
|
|
<strong>SPEC GREEN</strong>: blinking using the 100 MHz clock<br />
|
|
|
<strong>SPEC RED</strong>: PCIe reset</td>
|
|
|
</tr>
|
|
|
<tr class="odd">
|
|
|
<tr class="even">
|
|
|
<td>Test points</td>
|
|
|
<td>Four through hole test points (TP) next to the FMC connector<br />
|
|
|
<strong>TP1</strong>: connected to FielDrive RXD<br />
|
... | ... | @@ -97,7 +102,7 @@ The board could be plugged on a different carrier, but the supported gw/sw/lib a |
|
|
<strong>TP3</strong>: connected to Mock Turtle led&dbg reg bit 8<br />
|
|
|
<strong>TP4</strong>: connected to Mock Turtle led&dbg reg bit 9</td>
|
|
|
</tr>
|
|
|
<tr class="even">
|
|
|
<tr class="odd">
|
|
|
<td>Power Consumption</td>
|
|
|
<td>200 mA</td>
|
|
|
</tr>
|
... | ... | |