Page version | Author | Commit Message | Last updated | Format |
---|---|---|---|---|
4addb4cf | Erik van der Bij | GND symbol should point down. Copyright 2017 for OHL.Unused signals available on connectors (e.g. P12V, VADJ): do not connect a wire to them, leave open. | markdown | |
9dd586c0 | Erik van der Bij | TDI (D30) and TDO (D31), specified the pin numbers | markdown | |
ec09e2b7 | Erik van der Bij | No potentiometer. Example BOM moved | markdown | |
7a3709b6 | Erik van der Bij | Moved in BOM area from novices checklist. Corrected a sentence. | markdown | |
54b842df | Erik van der Bij | Removed duplication of power convention and direction | markdown | |
8917e006 | Erik van der Bij | Added Documentation section | markdown | |
4c7e0c80 | Erik van der Bij | Added h2. Documentation | markdown | |
e187ad62 | Erik van der Bij | missing bracket | markdown | |
a6f0c5fd | Erik van der Bij | Added schematics conventions section | markdown | |
20c3f1c4 | Erik van der Bij | (cf. SVEC: 9 C-types, 16 R-types). | markdown | |
82999c20 | Erik van der Bij | markdown | ||
b7d40a77 | Erik van der Bij | Power signals positioning: positive signals should point up, negative ones down. | markdown | |
2de6b452 | Erik van der Bij | FMC: EEPROM obligatory, thermometer IC | markdown | |
3fd2bafe | Erik van der Bij | full stop at end of line | markdown | |
307c4e31 | Erik van der Bij | # Check for testability. check for reading of version | markdown | |
a048a7c0 | Erik van der Bij | Recalculate output voltage of DC/DC converters using formulas from datasheet. | markdown | |
3c17a7af | Erik van der Bij | Cut a few lines for ease of printing | markdown | |
8ff11c41 | Erik van der Bij | Moved out from Schematics design reviews for easier printing, liberating header level too. | markdown |