Skip to content

A
AIDA-2020 TLU
Commit b5401c78 authored by David Cussans's avatar David Cussans
Browse files
Options

Changing names in address map to reflect the fact that they are RW not RO

parent 75e77d84
Hide whitespace changes
Inline Side-by-side
Showing with 6 additions and 6 deletions
projects/TLU_v1e/addr_table/TLUaddrmap.xml
View file @ b5401c78
......@@ -17,12 +17,12 @@
</node>
<node id="Shutter" address="0x2000" description="Shutter/T0 control" fwinfo="endpoint;width=4">
<node id="ControlW" address="0x0" permission="rw" description="Bit-0 controls if shutter pulses are active. 1 = active"/>
<node id="ShutterSelectW" address="0x1" permission="rw" description="Selects which input is used to trigger shutter"/>
<node id="InternalShutterPeriodW" address="0x2" permission="rw" description="Internal trig generator period ( units = number of strobe pulses)"/>
<node id="ShutterOnTimeW" address="0x3" permission="rw" description="Time between input trigger being received and shutter asserted(T1) ( units = number of strobe pulses)"/>
<node id="VetoOffTimeW" address="0x4" permission="rw" description="time between input trigger and veto being de-asserted(T2) ( units = number of strobe pulses)"/>
<node id="ShutterOffTimeW" address="0x5" permission="rw" description="time between input trigger and time at which shutter de-asserted and veto reasserted(T3) ( units = number of strobe pulses)"/>
<node id="ControlRW" address="0x0" permission="rw" description="Bit-0 controls if shutter pulses are active. 1 = active"/>
<node id="ShutterSelectRW" address="0x1" permission="rw" description="Selects which input is used to trigger shutter"/>
<node id="InternalShutterPeriodRW" address="0x2" permission="rw" description="Internal trig generator period ( units = number of strobe pulses)"/>
<node id="ShutterOnTimeRW" address="0x3" permission="rw" description="Time between input trigger being received and shutter asserted(T1) ( units = number of strobe pulses)"/>
<node id="VetoOffTimeRW" address="0x4" permission="rw" description="time between input trigger and veto being de-asserted(T2) ( units = number of strobe pulses)"/>
<node id="ShutterOffTimeRW" address="0x5" permission="rw" description="time between input trigger and time at which shutter de-asserted and veto reasserted(T3) ( units = number of strobe pulses)"/>
<node id="PulseT0" address="0x8" permission="rw" description="Writing to Bit-0 of this register causes sync line to pulse for one strobe-pulse interval"/>
</node>
<!-- I2C registers. Tested ok.-->
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment