Skip to content

F
FPGA and ARM SoC FMC Carrier FASEC
Commit 490a9cf1 authored by Pieter Van Trappen's avatar Pieter Van Trappen
Browse files
Options

porting Eino's project (thus 2016.4) to Vivado 2018.1, including: 

* submodule cores update
* wrpc stays the same
* set_registers.tcl script ported
parent 8a7939ca
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 36782 additions and 2075431 deletions
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_auto_pc_0/sim/system_design_auto_pc_0.v deleted 100644 → 0
View file @ 8a7939ca
// (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//
// DO NOT MODIFY THIS FILE.
// IP VLNV: xilinx.com:ip:axi_protocol_converter:2.1
// IP Revision: 11
`timescale 1ns/1ps
(* DowngradeIPIdentifiedWarnings = "yes" *)
module system_design_auto_pc_0 (
aclk,
aresetn,
s_axi_awaddr,
s_axi_awlen,
s_axi_awsize,
s_axi_awburst,
s_axi_awlock,
s_axi_awcache,
s_axi_awprot,
s_axi_awregion,
s_axi_awqos,
s_axi_awvalid,
s_axi_awready,
s_axi_wdata,
s_axi_wstrb,
s_axi_wlast,
s_axi_wvalid,
s_axi_wready,
s_axi_bresp,
s_axi_bvalid,
s_axi_bready,
m_axi_awaddr,
m_axi_awlen,
m_axi_awsize,
m_axi_awburst,
m_axi_awlock,
m_axi_awcache,
m_axi_awprot,
m_axi_awqos,
m_axi_awvalid,
m_axi_awready,
m_axi_wdata,
m_axi_wstrb,
m_axi_wlast,
m_axi_wvalid,
m_axi_wready,
m_axi_bresp,
m_axi_bvalid,
m_axi_bready
);
(* X_INTERFACE_INFO = "xilinx.com:signal:clock:1.0 CLK CLK" *)
input wire aclk;
(* X_INTERFACE_INFO = "xilinx.com:signal:reset:1.0 RST RST" *)
input wire aresetn;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWADDR" *)
input wire [31 : 0] s_axi_awaddr;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWLEN" *)
input wire [7 : 0] s_axi_awlen;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWSIZE" *)
input wire [2 : 0] s_axi_awsize;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWBURST" *)
input wire [1 : 0] s_axi_awburst;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWLOCK" *)
input wire [0 : 0] s_axi_awlock;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWCACHE" *)
input wire [3 : 0] s_axi_awcache;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWPROT" *)
input wire [2 : 0] s_axi_awprot;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWREGION" *)
input wire [3 : 0] s_axi_awregion;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWQOS" *)
input wire [3 : 0] s_axi_awqos;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWVALID" *)
input wire s_axi_awvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI AWREADY" *)
output wire s_axi_awready;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI WDATA" *)
input wire [31 : 0] s_axi_wdata;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI WSTRB" *)
input wire [3 : 0] s_axi_wstrb;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI WLAST" *)
input wire s_axi_wlast;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI WVALID" *)
input wire s_axi_wvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI WREADY" *)
output wire s_axi_wready;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI BRESP" *)
output wire [1 : 0] s_axi_bresp;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI BVALID" *)
output wire s_axi_bvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 S_AXI BREADY" *)
input wire s_axi_bready;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWADDR" *)
output wire [31 : 0] m_axi_awaddr;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWLEN" *)
output wire [3 : 0] m_axi_awlen;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWSIZE" *)
output wire [2 : 0] m_axi_awsize;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWBURST" *)
output wire [1 : 0] m_axi_awburst;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWLOCK" *)
output wire [1 : 0] m_axi_awlock;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWCACHE" *)
output wire [3 : 0] m_axi_awcache;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWPROT" *)
output wire [2 : 0] m_axi_awprot;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWQOS" *)
output wire [3 : 0] m_axi_awqos;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWVALID" *)
output wire m_axi_awvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI AWREADY" *)
input wire m_axi_awready;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI WDATA" *)
output wire [31 : 0] m_axi_wdata;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI WSTRB" *)
output wire [3 : 0] m_axi_wstrb;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI WLAST" *)
output wire m_axi_wlast;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI WVALID" *)
output wire m_axi_wvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI WREADY" *)
input wire m_axi_wready;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI BRESP" *)
input wire [1 : 0] m_axi_bresp;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI BVALID" *)
input wire m_axi_bvalid;
(* X_INTERFACE_INFO = "xilinx.com:interface:aximm:1.0 M_AXI BREADY" *)
output wire m_axi_bready;
axi_protocol_converter_v2_1_11_axi_protocol_converter #(
.C_FAMILY("zynq"),
.C_M_AXI_PROTOCOL(1),
.C_S_AXI_PROTOCOL(0),
.C_IGNORE_ID(1),
.C_AXI_ID_WIDTH(1),
.C_AXI_ADDR_WIDTH(32),
.C_AXI_DATA_WIDTH(32),
.C_AXI_SUPPORTS_WRITE(1),
.C_AXI_SUPPORTS_READ(0),
.C_AXI_SUPPORTS_USER_SIGNALS(0),
.C_AXI_AWUSER_WIDTH(1),
.C_AXI_ARUSER_WIDTH(1),
.C_AXI_WUSER_WIDTH(1),
.C_AXI_RUSER_WIDTH(1),
.C_AXI_BUSER_WIDTH(1),
.C_TRANSLATION_MODE(2)
) inst (
.aclk(aclk),
.aresetn(aresetn),
.s_axi_awid(1'H0),
.s_axi_awaddr(s_axi_awaddr),
.s_axi_awlen(s_axi_awlen),
.s_axi_awsize(s_axi_awsize),
.s_axi_awburst(s_axi_awburst),
.s_axi_awlock(s_axi_awlock),
.s_axi_awcache(s_axi_awcache),
.s_axi_awprot(s_axi_awprot),
.s_axi_awregion(s_axi_awregion),
.s_axi_awqos(s_axi_awqos),
.s_axi_awuser(1'H0),
.s_axi_awvalid(s_axi_awvalid),
.s_axi_awready(s_axi_awready),
.s_axi_wid(1'H0),
.s_axi_wdata(s_axi_wdata),
.s_axi_wstrb(s_axi_wstrb),
.s_axi_wlast(s_axi_wlast),
.s_axi_wuser(1'H0),
.s_axi_wvalid(s_axi_wvalid),
.s_axi_wready(s_axi_wready),
.s_axi_bid(),
.s_axi_bresp(s_axi_bresp),
.s_axi_buser(),
.s_axi_bvalid(s_axi_bvalid),
.s_axi_bready(s_axi_bready),
.s_axi_arid(1'H0),
.s_axi_araddr(32'H00000000),
.s_axi_arlen(8'H00),
.s_axi_arsize(3'H0),
.s_axi_arburst(2'H1),
.s_axi_arlock(1'H0),
.s_axi_arcache(4'H0),
.s_axi_arprot(3'H0),
.s_axi_arregion(4'H0),
.s_axi_arqos(4'H0),
.s_axi_aruser(1'H0),
.s_axi_arvalid(1'H0),
.s_axi_arready(),
.s_axi_rid(),
.s_axi_rdata(),
.s_axi_rresp(),
.s_axi_rlast(),
.s_axi_ruser(),
.s_axi_rvalid(),
.s_axi_rready(1'H0),
.m_axi_awid(),
.m_axi_awaddr(m_axi_awaddr),
.m_axi_awlen(m_axi_awlen),
.m_axi_awsize(m_axi_awsize),
.m_axi_awburst(m_axi_awburst),
.m_axi_awlock(m_axi_awlock),
.m_axi_awcache(m_axi_awcache),
.m_axi_awprot(m_axi_awprot),
.m_axi_awregion(),
.m_axi_awqos(m_axi_awqos),
.m_axi_awuser(),
.m_axi_awvalid(m_axi_awvalid),
.m_axi_awready(m_axi_awready),
.m_axi_wid(),
.m_axi_wdata(m_axi_wdata),
.m_axi_wstrb(m_axi_wstrb),
.m_axi_wlast(m_axi_wlast),
.m_axi_wuser(),
.m_axi_wvalid(m_axi_wvalid),
.m_axi_wready(m_axi_wready),
.m_axi_bid(1'H0),
.m_axi_bresp(m_axi_bresp),
.m_axi_buser(1'H0),
.m_axi_bvalid(m_axi_bvalid),
.m_axi_bready(m_axi_bready),
.m_axi_arid(),
.m_axi_araddr(),
.m_axi_arlen(),
.m_axi_arsize(),
.m_axi_arburst(),
.m_axi_arlock(),
.m_axi_arcache(),
.m_axi_arprot(),
.m_axi_arregion(),
.m_axi_arqos(),
.m_axi_aruser(),
.m_axi_arvalid(),
.m_axi_arready(1'H0),
.m_axi_rid(1'H0),
.m_axi_rdata(32'H00000000),
.m_axi_rresp(2'H0),
.m_axi_rlast(1'H1),
.m_axi_ruser(1'H0),
.m_axi_rvalid(1'H0),
.m_axi_rready()
);
endmodule
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_axi_uartlite_0_0/sim/system_design_axi_uartlite_0_0.vhd deleted 100644 → 0
View file @ 8a7939ca
-- (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
-- DO NOT MODIFY THIS FILE.
-- IP VLNV: xilinx.com:ip:axi_uartlite:2.0
-- IP Revision: 15
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;
LIBRARY axi_uartlite_v2_0_15;
USE axi_uartlite_v2_0_15.axi_uartlite;
ENTITY system_design_axi_uartlite_0_0 IS
PORT (
s_axi_aclk : IN STD_LOGIC;
s_axi_aresetn : IN STD_LOGIC;
interrupt : OUT STD_LOGIC;
s_axi_awaddr : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_awvalid : IN STD_LOGIC;
s_axi_awready : OUT STD_LOGIC;
s_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_wvalid : IN STD_LOGIC;
s_axi_wready : OUT STD_LOGIC;
s_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s_axi_bvalid : OUT STD_LOGIC;
s_axi_bready : IN STD_LOGIC;
s_axi_araddr : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_arvalid : IN STD_LOGIC;
s_axi_arready : OUT STD_LOGIC;
s_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s_axi_rvalid : OUT STD_LOGIC;
s_axi_rready : IN STD_LOGIC;
rx : IN STD_LOGIC;
tx : OUT STD_LOGIC
);
END system_design_axi_uartlite_0_0;
ARCHITECTURE system_design_axi_uartlite_0_0_arch OF system_design_axi_uartlite_0_0 IS
ATTRIBUTE DowngradeIPIdentifiedWarnings : STRING;
ATTRIBUTE DowngradeIPIdentifiedWarnings OF system_design_axi_uartlite_0_0_arch: ARCHITECTURE IS "yes";
COMPONENT axi_uartlite IS
GENERIC (
C_FAMILY : STRING;
C_S_AXI_ACLK_FREQ_HZ : INTEGER;
C_S_AXI_ADDR_WIDTH : INTEGER;
C_S_AXI_DATA_WIDTH : INTEGER;
C_BAUDRATE : INTEGER;
C_DATA_BITS : INTEGER;
C_USE_PARITY : INTEGER;
C_ODD_PARITY : INTEGER
);
PORT (
s_axi_aclk : IN STD_LOGIC;
s_axi_aresetn : IN STD_LOGIC;
interrupt : OUT STD_LOGIC;
s_axi_awaddr : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_awvalid : IN STD_LOGIC;
s_axi_awready : OUT STD_LOGIC;
s_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_wvalid : IN STD_LOGIC;
s_axi_wready : OUT STD_LOGIC;
s_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s_axi_bvalid : OUT STD_LOGIC;
s_axi_bready : IN STD_LOGIC;
s_axi_araddr : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s_axi_arvalid : IN STD_LOGIC;
s_axi_arready : OUT STD_LOGIC;
s_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s_axi_rvalid : OUT STD_LOGIC;
s_axi_rready : IN STD_LOGIC;
rx : IN STD_LOGIC;
tx : OUT STD_LOGIC
);
END COMPONENT axi_uartlite;
ATTRIBUTE X_INTERFACE_INFO : STRING;
ATTRIBUTE X_INTERFACE_INFO OF s_axi_aclk: SIGNAL IS "xilinx.com:signal:clock:1.0 ACLK CLK";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 ARESETN RST";
ATTRIBUTE X_INTERFACE_INFO OF interrupt: SIGNAL IS "xilinx.com:signal:interrupt:1.0 INTERRUPT INTERRUPT";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_awaddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI AWADDR";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_awvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI AWVALID";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_awready: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI AWREADY";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_wdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI WDATA";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_wstrb: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI WSTRB";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_wvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI WVALID";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_wready: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI WREADY";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_bresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI BRESP";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_bvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI BVALID";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_bready: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI BREADY";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_araddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI ARADDR";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_arvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI ARVALID";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_arready: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI ARREADY";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_rdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI RDATA";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_rresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI RRESP";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_rvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI RVALID";
ATTRIBUTE X_INTERFACE_INFO OF s_axi_rready: SIGNAL IS "xilinx.com:interface:aximm:1.0 S_AXI RREADY";
ATTRIBUTE X_INTERFACE_INFO OF rx: SIGNAL IS "xilinx.com:interface:uart:1.0 UART RxD";
ATTRIBUTE X_INTERFACE_INFO OF tx: SIGNAL IS "xilinx.com:interface:uart:1.0 UART TxD";
BEGIN
U0 : axi_uartlite
GENERIC MAP (
C_FAMILY => "zynq",
C_S_AXI_ACLK_FREQ_HZ => 100000000,
C_S_AXI_ADDR_WIDTH => 4,
C_S_AXI_DATA_WIDTH => 32,
C_BAUDRATE => 115200,
C_DATA_BITS => 8,
C_USE_PARITY => 0,
C_ODD_PARITY => 0
)
PORT MAP (
s_axi_aclk => s_axi_aclk,
s_axi_aresetn => s_axi_aresetn,
interrupt => interrupt,
s_axi_awaddr => s_axi_awaddr,
s_axi_awvalid => s_axi_awvalid,
s_axi_awready => s_axi_awready,
s_axi_wdata => s_axi_wdata,
s_axi_wstrb => s_axi_wstrb,
s_axi_wvalid => s_axi_wvalid,
s_axi_wready => s_axi_wready,
s_axi_bresp => s_axi_bresp,
s_axi_bvalid => s_axi_bvalid,
s_axi_bready => s_axi_bready,
s_axi_araddr => s_axi_araddr,
s_axi_arvalid => s_axi_arvalid,
s_axi_arready => s_axi_arready,
s_axi_rdata => s_axi_rdata,
s_axi_rresp => s_axi_rresp,
s_axi_rvalid => s_axi_rvalid,
s_axi_rready => s_axi_rready,
rx => rx,
tx => tx
);
END system_design_axi_uartlite_0_0_arch;
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_axi_wb_i2c_master_0_1/sim/system_design_axi_wb_i2c_master_0_1.vhd deleted 100644 → 0
View file @ 8a7939ca
-- (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
-- DO NOT MODIFY THIS FILE.
-- IP VLNV: cern.ch:ip:axi_wb_i2c_master:3.2.0
-- IP Revision: 8
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;
LIBRARY hdl_lib;
USE hdl_lib.axi_wb_i2c_master;
ENTITY system_design_axi_wb_i2c_master_0_1 IS
PORT (
i2c_scl_i : IN STD_LOGIC;
i2c_scl_o : OUT STD_LOGIC;
i2c_scl_t : OUT STD_LOGIC;
i2c_sda_i : IN STD_LOGIC;
i2c_sda_o : OUT STD_LOGIC;
i2c_sda_t : OUT STD_LOGIC;
axi_int_o : OUT STD_LOGIC;
s00_axi_aclk : IN STD_LOGIC;
s00_axi_aresetn : IN STD_LOGIC;
s00_axi_awaddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_awprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_awvalid : IN STD_LOGIC;
s00_axi_awready : OUT STD_LOGIC;
s00_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s00_axi_wvalid : IN STD_LOGIC;
s00_axi_wready : OUT STD_LOGIC;
s00_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_bvalid : OUT STD_LOGIC;
s00_axi_bready : IN STD_LOGIC;
s00_axi_araddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_arprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_arvalid : IN STD_LOGIC;
s00_axi_arready : OUT STD_LOGIC;
s00_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_rvalid : OUT STD_LOGIC;
s00_axi_rready : IN STD_LOGIC
);
END system_design_axi_wb_i2c_master_0_1;
ARCHITECTURE system_design_axi_wb_i2c_master_0_1_arch OF system_design_axi_wb_i2c_master_0_1 IS
ATTRIBUTE DowngradeIPIdentifiedWarnings : STRING;
ATTRIBUTE DowngradeIPIdentifiedWarnings OF system_design_axi_wb_i2c_master_0_1_arch: ARCHITECTURE IS "yes";
COMPONENT axi_wb_i2c_master IS
GENERIC (
C_S00_AXI_DATA_WIDTH : INTEGER;
C_S00_AXI_ADDR_WIDTH : INTEGER
);
PORT (
i2c_scl_i : IN STD_LOGIC;
i2c_scl_o : OUT STD_LOGIC;
i2c_scl_t : OUT STD_LOGIC;
i2c_sda_i : IN STD_LOGIC;
i2c_sda_o : OUT STD_LOGIC;
i2c_sda_t : OUT STD_LOGIC;
axi_int_o : OUT STD_LOGIC;
s00_axi_aclk : IN STD_LOGIC;
s00_axi_aresetn : IN STD_LOGIC;
s00_axi_awaddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_awprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_awvalid : IN STD_LOGIC;
s00_axi_awready : OUT STD_LOGIC;
s00_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s00_axi_wvalid : IN STD_LOGIC;
s00_axi_wready : OUT STD_LOGIC;
s00_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_bvalid : OUT STD_LOGIC;
s00_axi_bready : IN STD_LOGIC;
s00_axi_araddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_arprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_arvalid : IN STD_LOGIC;
s00_axi_arready : OUT STD_LOGIC;
s00_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_rvalid : OUT STD_LOGIC;
s00_axi_rready : IN STD_LOGIC
);
END COMPONENT axi_wb_i2c_master;
ATTRIBUTE X_INTERFACE_INFO : STRING;
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_i: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_I";
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_o: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_O";
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_t: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_T";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_i: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_I";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_o: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_O";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_t: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_T";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_aclk: SIGNAL IS "xilinx.com:signal:clock:1.0 s00_axi_aclk CLK";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 s00_axi_aresetn RST";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awaddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWADDR";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awprot: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWPROT";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WDATA";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wstrb: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WSTRB";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BRESP";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_araddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARADDR";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arprot: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARPROT";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RDATA";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RRESP";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RREADY";
BEGIN
U0 : axi_wb_i2c_master
GENERIC MAP (
C_S00_AXI_DATA_WIDTH => 32,
C_S00_AXI_ADDR_WIDTH => 32
)
PORT MAP (
i2c_scl_i => i2c_scl_i,
i2c_scl_o => i2c_scl_o,
i2c_scl_t => i2c_scl_t,
i2c_sda_i => i2c_sda_i,
i2c_sda_o => i2c_sda_o,
i2c_sda_t => i2c_sda_t,
axi_int_o => axi_int_o,
s00_axi_aclk => s00_axi_aclk,
s00_axi_aresetn => s00_axi_aresetn,
s00_axi_awaddr => s00_axi_awaddr,
s00_axi_awprot => s00_axi_awprot,
s00_axi_awvalid => s00_axi_awvalid,
s00_axi_awready => s00_axi_awready,
s00_axi_wdata => s00_axi_wdata,
s00_axi_wstrb => s00_axi_wstrb,
s00_axi_wvalid => s00_axi_wvalid,
s00_axi_wready => s00_axi_wready,
s00_axi_bresp => s00_axi_bresp,
s00_axi_bvalid => s00_axi_bvalid,
s00_axi_bready => s00_axi_bready,
s00_axi_araddr => s00_axi_araddr,
s00_axi_arprot => s00_axi_arprot,
s00_axi_arvalid => s00_axi_arvalid,
s00_axi_arready => s00_axi_arready,
s00_axi_rdata => s00_axi_rdata,
s00_axi_rresp => s00_axi_rresp,
s00_axi_rvalid => s00_axi_rvalid,
s00_axi_rready => s00_axi_rready
);
END system_design_axi_wb_i2c_master_0_1_arch;
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_axi_wb_i2c_master_2_0/sim/system_design_axi_wb_i2c_master_2_0.vhd deleted 100644 → 0
View file @ 8a7939ca
-- (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
-- DO NOT MODIFY THIS FILE.
-- IP VLNV: cern.ch:ip:axi_wb_i2c_master:3.2.0
-- IP Revision: 8
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;
LIBRARY hdl_lib;
USE hdl_lib.axi_wb_i2c_master;
ENTITY system_design_axi_wb_i2c_master_2_0 IS
PORT (
i2c_scl_i : IN STD_LOGIC;
i2c_scl_o : OUT STD_LOGIC;
i2c_scl_t : OUT STD_LOGIC;
i2c_sda_i : IN STD_LOGIC;
i2c_sda_o : OUT STD_LOGIC;
i2c_sda_t : OUT STD_LOGIC;
axi_int_o : OUT STD_LOGIC;
s00_axi_aclk : IN STD_LOGIC;
s00_axi_aresetn : IN STD_LOGIC;
s00_axi_awaddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_awprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_awvalid : IN STD_LOGIC;
s00_axi_awready : OUT STD_LOGIC;
s00_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s00_axi_wvalid : IN STD_LOGIC;
s00_axi_wready : OUT STD_LOGIC;
s00_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_bvalid : OUT STD_LOGIC;
s00_axi_bready : IN STD_LOGIC;
s00_axi_araddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_arprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_arvalid : IN STD_LOGIC;
s00_axi_arready : OUT STD_LOGIC;
s00_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_rvalid : OUT STD_LOGIC;
s00_axi_rready : IN STD_LOGIC
);
END system_design_axi_wb_i2c_master_2_0;
ARCHITECTURE system_design_axi_wb_i2c_master_2_0_arch OF system_design_axi_wb_i2c_master_2_0 IS
ATTRIBUTE DowngradeIPIdentifiedWarnings : STRING;
ATTRIBUTE DowngradeIPIdentifiedWarnings OF system_design_axi_wb_i2c_master_2_0_arch: ARCHITECTURE IS "yes";
COMPONENT axi_wb_i2c_master IS
GENERIC (
C_S00_AXI_DATA_WIDTH : INTEGER;
C_S00_AXI_ADDR_WIDTH : INTEGER
);
PORT (
i2c_scl_i : IN STD_LOGIC;
i2c_scl_o : OUT STD_LOGIC;
i2c_scl_t : OUT STD_LOGIC;
i2c_sda_i : IN STD_LOGIC;
i2c_sda_o : OUT STD_LOGIC;
i2c_sda_t : OUT STD_LOGIC;
axi_int_o : OUT STD_LOGIC;
s00_axi_aclk : IN STD_LOGIC;
s00_axi_aresetn : IN STD_LOGIC;
s00_axi_awaddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_awprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_awvalid : IN STD_LOGIC;
s00_axi_awready : OUT STD_LOGIC;
s00_axi_wdata : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_wstrb : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
s00_axi_wvalid : IN STD_LOGIC;
s00_axi_wready : OUT STD_LOGIC;
s00_axi_bresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_bvalid : OUT STD_LOGIC;
s00_axi_bready : IN STD_LOGIC;
s00_axi_araddr : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_arprot : IN STD_LOGIC_VECTOR(2 DOWNTO 0);
s00_axi_arvalid : IN STD_LOGIC;
s00_axi_arready : OUT STD_LOGIC;
s00_axi_rdata : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
s00_axi_rresp : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
s00_axi_rvalid : OUT STD_LOGIC;
s00_axi_rready : IN STD_LOGIC
);
END COMPONENT axi_wb_i2c_master;
ATTRIBUTE X_INTERFACE_INFO : STRING;
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_i: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_I";
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_o: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_O";
ATTRIBUTE X_INTERFACE_INFO OF i2c_scl_t: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SCL_T";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_i: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_I";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_o: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_O";
ATTRIBUTE X_INTERFACE_INFO OF i2c_sda_t: SIGNAL IS "xilinx.com:interface:iic:1.0 i2c_master SDA_T";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_aclk: SIGNAL IS "xilinx.com:signal:clock:1.0 s00_axi_aclk CLK";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 s00_axi_aresetn RST";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awaddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWADDR";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awprot: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWPROT";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_awready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi AWREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WDATA";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wstrb: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WSTRB";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_wready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi WREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BRESP";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_bready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi BREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_araddr: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARADDR";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arprot: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARPROT";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_arready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi ARREADY";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rdata: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RDATA";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rresp: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RRESP";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rvalid: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RVALID";
ATTRIBUTE X_INTERFACE_INFO OF s00_axi_rready: SIGNAL IS "xilinx.com:interface:aximm:1.0 s00_axi RREADY";
BEGIN
U0 : axi_wb_i2c_master
GENERIC MAP (
C_S00_AXI_DATA_WIDTH => 32,
C_S00_AXI_ADDR_WIDTH => 32
)
PORT MAP (
i2c_scl_i => i2c_scl_i,
i2c_scl_o => i2c_scl_o,
i2c_scl_t => i2c_scl_t,
i2c_sda_i => i2c_sda_i,
i2c_sda_o => i2c_sda_o,
i2c_sda_t => i2c_sda_t,
axi_int_o => axi_int_o,
s00_axi_aclk => s00_axi_aclk,
s00_axi_aresetn => s00_axi_aresetn,
s00_axi_awaddr => s00_axi_awaddr,
s00_axi_awprot => s00_axi_awprot,
s00_axi_awvalid => s00_axi_awvalid,
s00_axi_awready => s00_axi_awready,
s00_axi_wdata => s00_axi_wdata,
s00_axi_wstrb => s00_axi_wstrb,
s00_axi_wvalid => s00_axi_wvalid,
s00_axi_wready => s00_axi_wready,
s00_axi_bresp => s00_axi_bresp,
s00_axi_bvalid => s00_axi_bvalid,
s00_axi_bready => s00_axi_bready,
s00_axi_araddr => s00_axi_araddr,
s00_axi_arprot => s00_axi_arprot,
s00_axi_arvalid => s00_axi_arvalid,
s00_axi_arready => s00_axi_arready,
s00_axi_rdata => s00_axi_rdata,
s00_axi_rresp => s00_axi_rresp,
s00_axi_rvalid => s00_axi_rvalid,
s00_axi_rready => s00_axi_rready
);
END system_design_axi_wb_i2c_master_2_0_arch;
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_rst_processing_system7_0_100M_2/sim/system_design_rst_processing_system7_0_100M_2.vhd deleted 100644 → 0
View file @ 8a7939ca
-- (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
-- DO NOT MODIFY THIS FILE.
-- IP VLNV: xilinx.com:ip:proc_sys_reset:5.0
-- IP Revision: 10
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;
LIBRARY proc_sys_reset_v5_0_10;
USE proc_sys_reset_v5_0_10.proc_sys_reset;
ENTITY system_design_rst_processing_system7_0_100M_2 IS
PORT (
slowest_sync_clk : IN STD_LOGIC;
ext_reset_in : IN STD_LOGIC;
aux_reset_in : IN STD_LOGIC;
mb_debug_sys_rst : IN STD_LOGIC;
dcm_locked : IN STD_LOGIC;
mb_reset : OUT STD_LOGIC;
bus_struct_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
interconnect_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0)
);
END system_design_rst_processing_system7_0_100M_2;
ARCHITECTURE system_design_rst_processing_system7_0_100M_2_arch OF system_design_rst_processing_system7_0_100M_2 IS
ATTRIBUTE DowngradeIPIdentifiedWarnings : STRING;
ATTRIBUTE DowngradeIPIdentifiedWarnings OF system_design_rst_processing_system7_0_100M_2_arch: ARCHITECTURE IS "yes";
COMPONENT proc_sys_reset IS
GENERIC (
C_FAMILY : STRING;
C_EXT_RST_WIDTH : INTEGER;
C_AUX_RST_WIDTH : INTEGER;
C_EXT_RESET_HIGH : STD_LOGIC;
C_AUX_RESET_HIGH : STD_LOGIC;
C_NUM_BUS_RST : INTEGER;
C_NUM_PERP_RST : INTEGER;
C_NUM_INTERCONNECT_ARESETN : INTEGER;
C_NUM_PERP_ARESETN : INTEGER
);
PORT (
slowest_sync_clk : IN STD_LOGIC;
ext_reset_in : IN STD_LOGIC;
aux_reset_in : IN STD_LOGIC;
mb_debug_sys_rst : IN STD_LOGIC;
dcm_locked : IN STD_LOGIC;
mb_reset : OUT STD_LOGIC;
bus_struct_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
interconnect_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0)
);
END COMPONENT proc_sys_reset;
ATTRIBUTE X_INTERFACE_INFO : STRING;
ATTRIBUTE X_INTERFACE_INFO OF slowest_sync_clk: SIGNAL IS "xilinx.com:signal:clock:1.0 clock CLK";
ATTRIBUTE X_INTERFACE_INFO OF ext_reset_in: SIGNAL IS "xilinx.com:signal:reset:1.0 ext_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF aux_reset_in: SIGNAL IS "xilinx.com:signal:reset:1.0 aux_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF mb_debug_sys_rst: SIGNAL IS "xilinx.com:signal:reset:1.0 dbg_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF mb_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 mb_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF bus_struct_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 bus_struct_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF peripheral_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 peripheral_high_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF interconnect_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 interconnect_low_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF peripheral_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 peripheral_low_rst RST";
BEGIN
U0 : proc_sys_reset
GENERIC MAP (
C_FAMILY => "zynq",
C_EXT_RST_WIDTH => 4,
C_AUX_RST_WIDTH => 4,
C_EXT_RESET_HIGH => '0',
C_AUX_RESET_HIGH => '0',
C_NUM_BUS_RST => 1,
C_NUM_PERP_RST => 1,
C_NUM_INTERCONNECT_ARESETN => 1,
C_NUM_PERP_ARESETN => 1
)
PORT MAP (
slowest_sync_clk => slowest_sync_clk,
ext_reset_in => ext_reset_in,
aux_reset_in => aux_reset_in,
mb_debug_sys_rst => mb_debug_sys_rst,
dcm_locked => dcm_locked,
mb_reset => mb_reset,
bus_struct_reset => bus_struct_reset,
peripheral_reset => peripheral_reset,
interconnect_aresetn => interconnect_aresetn,
peripheral_aresetn => peripheral_aresetn
);
END system_design_rst_processing_system7_0_100M_2_arch;
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_rst_wrc_1p_kintex7_0_62M_0/sim/system_design_rst_wrc_1p_kintex7_0_62M_0.vhd deleted 100644 → 0
View file @ 8a7939ca
-- (c) Copyright 1995-2018 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
-- DO NOT MODIFY THIS FILE.
-- IP VLNV: xilinx.com:ip:proc_sys_reset:5.0
-- IP Revision: 10
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;
LIBRARY proc_sys_reset_v5_0_10;
USE proc_sys_reset_v5_0_10.proc_sys_reset;
ENTITY system_design_rst_wrc_1p_kintex7_0_62M_0 IS
PORT (
slowest_sync_clk : IN STD_LOGIC;
ext_reset_in : IN STD_LOGIC;
aux_reset_in : IN STD_LOGIC;
mb_debug_sys_rst : IN STD_LOGIC;
dcm_locked : IN STD_LOGIC;
mb_reset : OUT STD_LOGIC;
bus_struct_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
interconnect_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0)
);
END system_design_rst_wrc_1p_kintex7_0_62M_0;
ARCHITECTURE system_design_rst_wrc_1p_kintex7_0_62M_0_arch OF system_design_rst_wrc_1p_kintex7_0_62M_0 IS
ATTRIBUTE DowngradeIPIdentifiedWarnings : STRING;
ATTRIBUTE DowngradeIPIdentifiedWarnings OF system_design_rst_wrc_1p_kintex7_0_62M_0_arch: ARCHITECTURE IS "yes";
COMPONENT proc_sys_reset IS
GENERIC (
C_FAMILY : STRING;
C_EXT_RST_WIDTH : INTEGER;
C_AUX_RST_WIDTH : INTEGER;
C_EXT_RESET_HIGH : STD_LOGIC;
C_AUX_RESET_HIGH : STD_LOGIC;
C_NUM_BUS_RST : INTEGER;
C_NUM_PERP_RST : INTEGER;
C_NUM_INTERCONNECT_ARESETN : INTEGER;
C_NUM_PERP_ARESETN : INTEGER
);
PORT (
slowest_sync_clk : IN STD_LOGIC;
ext_reset_in : IN STD_LOGIC;
aux_reset_in : IN STD_LOGIC;
mb_debug_sys_rst : IN STD_LOGIC;
dcm_locked : IN STD_LOGIC;
mb_reset : OUT STD_LOGIC;
bus_struct_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_reset : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
interconnect_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
peripheral_aresetn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0)
);
END COMPONENT proc_sys_reset;
ATTRIBUTE X_INTERFACE_INFO : STRING;
ATTRIBUTE X_INTERFACE_INFO OF slowest_sync_clk: SIGNAL IS "xilinx.com:signal:clock:1.0 clock CLK";
ATTRIBUTE X_INTERFACE_INFO OF ext_reset_in: SIGNAL IS "xilinx.com:signal:reset:1.0 ext_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF aux_reset_in: SIGNAL IS "xilinx.com:signal:reset:1.0 aux_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF mb_debug_sys_rst: SIGNAL IS "xilinx.com:signal:reset:1.0 dbg_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF mb_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 mb_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF bus_struct_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 bus_struct_reset RST";
ATTRIBUTE X_INTERFACE_INFO OF peripheral_reset: SIGNAL IS "xilinx.com:signal:reset:1.0 peripheral_high_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF interconnect_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 interconnect_low_rst RST";
ATTRIBUTE X_INTERFACE_INFO OF peripheral_aresetn: SIGNAL IS "xilinx.com:signal:reset:1.0 peripheral_low_rst RST";
BEGIN
U0 : proc_sys_reset
GENERIC MAP (
C_FAMILY => "zynq",
C_EXT_RST_WIDTH => 4,
C_AUX_RST_WIDTH => 4,
C_EXT_RESET_HIGH => '0',
C_AUX_RESET_HIGH => '0',
C_NUM_BUS_RST => 1,
C_NUM_PERP_RST => 1,
C_NUM_INTERCONNECT_ARESETN => 1,
C_NUM_PERP_ARESETN => 1
)
PORT MAP (
slowest_sync_clk => slowest_sync_clk,
ext_reset_in => ext_reset_in,
aux_reset_in => aux_reset_in,
mb_debug_sys_rst => mb_debug_sys_rst,
dcm_locked => dcm_locked,
mb_reset => mb_reset,
bus_struct_reset => bus_struct_reset,
peripheral_reset => peripheral_reset,
interconnect_aresetn => interconnect_aresetn,
peripheral_aresetn => peripheral_aresetn
);
END system_design_rst_wrc_1p_kintex7_0_62M_0_arch;
FASEC_prototype.ip_user_files/bd/system_design/ip/system_design_xlconcat_0_0/system_design_xlconcat_0_0_sim_netlist.v deleted 100644 → 0
View file @ 8a7939ca
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
// --------------------------------------------------------------------------------
// Tool Version: Vivado v.2016.4 (lin64) Build 1756540 Mon Jan 23 19:11:19 MST 2017
// Date : Wed Mar 7 14:48:37 2018
// Host : lapte23307 running 64-bit CentOS Linux release 7.4.1708 (Core)
// Command : write_verilog -force -mode funcsim
// /home/xilinx/projects/FASEC_prototype/FASEC_prototype.srcs/sources_1/bd/system_design/ip/system_design_xlconcat_0_0/system_design_xlconcat_0_0_sim_netlist.v
// Design : system_design_xlconcat_0_0
// Purpose : This verilog netlist is a functional simulation representation of the design and should not be modified
// or synthesized. This netlist cannot be used for SDF annotated simulation.
// Device : xc7z030ffg676-2
// --------------------------------------------------------------------------------
`timescale 1 ps / 1 ps
(* CHECK_LICENSE_TYPE = "system_design_xlconcat_0_0,xlconcat,{}" *) (* downgradeipidentifiedwarnings = "yes" *) (* x_core_info = "xlconcat,Vivado 2016.4" *)
(* NotValidForBitStream *)
module system_design_xlconcat_0_0
(In0,
In1,
In2,
In3,
In4,
In5,
In6,
dout);
input [0:0]In0;
input [0:0]In1;
input [0:0]In2;
input [0:0]In3;
input [0:0]In4;
input [0:0]In5;
input [0:0]In6;
output [6:0]dout;
wire [0:0]In0;
wire [0:0]In1;
wire [0:0]In2;
wire [0:0]In3;
wire [0:0]In4;
wire [0:0]In5;
wire [0:0]In6;
assign dout[6] = In6;
assign dout[5] = In5;
assign dout[4] = In4;
assign dout[3] = In3;
assign dout[2] = In2;
assign dout[1] = In1;
assign dout[0] = In0;
endmodule
`ifndef GLBL
`define GLBL
`timescale 1 ps / 1 ps
module glbl ();
parameter ROC_WIDTH = 100000;
parameter TOC_WIDTH = 0;
//-------- STARTUP Globals --------------
wire GSR;
wire GTS;
wire GWE;
wire PRLD;
tri1 p_up_tmp;
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
wire PROGB_GLBL;
wire CCLKO_GLBL;
wire FCSBO_GLBL;
wire [3:0] DO_GLBL;
wire [3:0] DI_GLBL;
reg GSR_int;
reg GTS_int;
reg PRLD_int;
//-------- JTAG Globals --------------
wire JTAG_TDO_GLBL;
wire JTAG_TCK_GLBL;
wire JTAG_TDI_GLBL;
wire JTAG_TMS_GLBL;
wire JTAG_TRST_GLBL;
reg JTAG_CAPTURE_GLBL;
reg JTAG_RESET_GLBL;
reg JTAG_SHIFT_GLBL;
reg JTAG_UPDATE_GLBL;
reg JTAG_RUNTEST_GLBL;
reg JTAG_SEL1_GLBL = 0;
reg JTAG_SEL2_GLBL = 0 ;
reg JTAG_SEL3_GLBL = 0;
reg JTAG_SEL4_GLBL = 0;
reg JTAG_USER_TDO1_GLBL = 1'bz;
reg JTAG_USER_TDO2_GLBL = 1'bz;
reg JTAG_USER_TDO3_GLBL = 1'bz;
reg JTAG_USER_TDO4_GLBL = 1'bz;
assign (weak1, weak0) GSR = GSR_int;
assign (weak1, weak0) GTS = GTS_int;
assign (weak1, weak0) PRLD = PRLD_int;
initial begin
GSR_int = 1'b1;
PRLD_int = 1'b1;
#(ROC_WIDTH)
GSR_int = 1'b0;
PRLD_int = 1'b0;
end
initial begin
GTS_int = 1'b1;
#(TOC_WIDTH)
GTS_int = 1'b0;
end
endmodule
`endif
FASEC_prototype.ip_user_files/mem_init_files/libps7.dll 0 → 100755
View file @ 490a9cf1
This diff is collapsed.
FASEC_prototype.ip_user_files/mem_init_files/libps7.so 0 → 100755
View file @ 490a9cf1
This diff is collapsed.
FASEC_prototype.ip_user_files/mem_init_files/libremoteport.dll 0 → 100755
View file @ 490a9cf1
This diff is collapsed.
FASEC_prototype.ip_user_files/mem_init_files/libremoteport.so 0 → 100755
View file @ 490a9cf1
This diff is collapsed.
FASEC_prototype.srcs/tcl/set_registers.tcl
View file @ 490a9cf1
This diff is collapsed.
FASEC_prototype.xpr
View file @ 490a9cf1
This diff is collapsed.
cores @ 0e406a2e
This diff is collapsed.
ip_upgrade.log
View file @ 490a9cf1
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment