It is more natural to read a zero value from a register during normal operation / after reset. Also avoids the extra logic outside of the wbgen carrier_csr which was needed to accomodate the non-default value of '1'

hdl: prevent FSM from going through the pre-trigger state, if there are no pre-trigger samples to be acquired. Fixes the error in the samples counter register when pre_trigger samples was zero.

Because of a -yet to be fully understood- bug, acquisition produces
corrupted samples when number_of_samples is exactly equal to multi_shot dpram
size. So for now, number_of_samples should be less than multi_shot ram size.

hdl/sim: sanitized and updated SPEC simulation. Tested with ModelSIM 10.2a, works. Did not verify simulation results

hdl: update ddr3-sp6-core pointer so that it includes the latest Manifest.py of ddr3-sp6-core without any local variables

syn: removed (and ignored) all hdlmake-generated files from SPEC and SVEC. Xilinx ISE project files could be added on official release commits if necessary

syn: updated Manifest.py for SPEC and SVEC to work with latest hdlmake notation for git revisions (@@) and align them with current git submodules

hdl: Change ddr-sp6-core module to master branch, add custom variable to select ddr copntrollers (requires hdlmake v2.1).

The sampling frequency can't be changed dynamically in the current design.
This is due to the internal fpga pll that is configured for a fixed 400MHz input.

- Rename folders with shorter names.
- Remove documents un-related to gateware (e.g. board design).