Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

wrc_ptp_ppsi.o was not picked any more from libarch.a into ppsi.o,
now that we don't refer to pp_diag_verbosity any more. So force
linking it, or the final wrc.elf build will fail for undefined symbols.

Also, remove a no-more-needed -I directive.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We are already not using "const" verbosity in wrpc-sw, which is our most
size-constrained architecture. So remove this legacy support.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is a long-standing bug introduced when fsm.c was changed to
immediately enter a new state (before that, we had a grace period in
state-faulty).  The problem is exposed by running the suggested
config file, if eth1 and/or eth2 exist but are currently down.

This patch introduces a specific timeout, so we wait 4 seconds before
reinitializing the pp instance; we thus avoid burning 100% CPU Time in
trying again and again.

As a side effect, this reduces timeouts provided to extensions from 4
to 3. I could have reused one of the other timeouts, as faulty state
does not use them, but I'd better have proper timeout names in
diagnostics.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The "port" config word is not creating a new port any more, it locates
an existing port, if any is there.  This allows, for example, to set
diagnostics from the command line:

	    -C  "port eth0; diagnostics 022"
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This option sets configuration options from command line,
as specified in CONFIG_ITEM.
CONFIG_ITEM must be a valid configuration string, so you'll likely
need to quote it on the command line.

The semicolon can be used as a separator, to stick several
configuration items in the same argument.  This option can also be
used more than once on the same command line, to set different
parameters. If used twice to set the same parameter, the last value
overrides previous values -- and later config files, specified with
"-f" may override -C values.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The structures are going to be exported, so use the pp_ prefix.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This undoes part of the strangeness we had in configuration files. Now
"-f" is recognized on the command line, and more than one file can be
specified. Only if no file is found, the default one is used
(wr-switch looks in /wrc/etc/ppsi.conf first).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is a rewrite of the configuration parser, more based on data
structures se we'll soon be able to read more than one configuration
file (to add special cases while developing) and protocol extensions
will be able to extend the table of allowed options.

Both the configuration file format and the layout of the code calling
lib/conf.c::pp_config_file() is unchanged in this commit. This means
that even if you enable config diagnostics on the command line it
won't have effect, because the config file is parsed before the
command line. This is fixed by a later commit.

The only visible change in this commit is that "port" is allowed as a
synonim for "link", to be deprecated soon (but it will not be removed
from the parsing of the config file). Thus, pp_instance->link_name is
renamed to port_name.

The compiled size of this commit is the same as the previous one.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Also, add "config" to the list of diag things, to allow tracing config
file errors (used in later commits).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This patch adds support for modifying the utc/tai offset. The
"set" time operation, when called with a NULL pointer to the time
structure, will do the operation in its own arch-specific way.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds support for the utc/tai offset.
Unix, bare and wrs use UTC in system time and TAI in PTP frames.
WR time is TAI as well, and wrpc-sw passes 0 as offset value when
run as master.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Some fields are just statically there: avoid malloc and error checking
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This saves a few dozen bytes in wrpc-sw builds.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The 1588 standard talks extensively about "mean path delay"
and the meanPathDelay variable.   Even if the name is not the
best one, we'd better rename the fields and variable.

This is a massive change, but the currenct code has been validated at
the Lemgo plug fest, and I don't expect any need to revert older
patches at this point.  I'm sorry for git-blame users, including myself,
but this change is a step forward.  I should have knonw better when
choosing "one way delay" between the two names of the older code.

Thanks to Aurelio for noting the problem.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We want to turn PPS output on or off when it changes, not each and every
time. This is both to avoid wasting CPU cycles and to allow developers
to activate pps even when not synced or badly-synced.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is the true and solid UDP support for WR. It manages both
WR and non-WR communication, both as master and slave.

The previous commit was wrong:

  5c918341 wrs-socket: if UDP is requested, fall back to non-WR

the reason is that we can't use Unix timestamps and WR time: to discipline
the WR mechanism we need to collect WR timestamps. So now UDP is part
of wrs-socket.c, to use the WR timestamps from hardware.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This split out of an helper to enable timestamping is needed to
support the UDP protocol, in a later commit.  No, it is not needed,
but it's useful anyways.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Commit

	06cb0670 time-wrs: implement time_set()

is changin the seconds leaving the fractional part alone. However, the
servo won't time-set again, but will rather converge, and this takes time.

We now adjust nanoseconds first, so the servo will still notice a
more-than-one-second error and will call our time-set again. Thus,
we jump to proper time in a few seconds instead of slowly converging from
far away.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>